CUT55 & 40Amp, 110/220V

$198.99
Type :
$198.99

HITBOX 40Amp Plasma Cutter 110V/220V Air Plasma Cutter DC Inverter Cutting Machine - 60% Duty Cycle All Kinds of Steel Clean Cutting Machine IGBT Technology (CUT55)

  • 【50 Amp 80% Air Plasma Cutter】The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%.
  • 【Portable Design & LCD display】 Compact plasma cutting machine with LCD digital display and equipped with a portable handle.It is very convenient to operate and carry.
  • 【100% Safety】This plasma cutter uses non-hazardous compressed air to cut. With protection of electric circuit to against the over current, over voltage and low-voltage situation. Aim to ensure the safe operation.
  • 【Wide Applications】Suitable for cutting stainless steel, alloy steel, mild steel, copper, carbon steel, aluminum, and other metals.Can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc.
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at the first time.We have agent in the United States and our 24 x 7 friendly customer support team is always ready to help.
  • High Speed, Precision Plasma Cutting At A Low Cost

     

     

     

    HITBOX Plasma Cutter is designed for light cutting projects. This unit is the most compact plasma cutter one can find in the market and weights only 8kg (17.6lbs). Our Cut 55 Plasma Cutter uses the latest and most advanced IGBT technology.Automatic 220V DC 40A output 60% duty cycle air plasma cutter without dross or slag.It’s like a hot knife through butter.

    Main Parameter

    Input Voltage (V):220±15%
    Input Frequency (Hz): 50/60
    Rate power(KVA): 6.0
    No load loss(W): 45
    Duty cycle(%)@25ºC: 70
    Efficiency(%): 85
    Insulation class: B
    Protection class: IP23
    Output Current Range(A): 10-50A

     

    Latest Posts

    MT2000Ⅱの紹介について (Japanese)

    MT2000Ⅱの紹介について (Japanese)

    今年新発表した第2世代のMT2000Ⅱは第1世代のMT2000より出力電流を増加して、制御ソフトウェアをアップグレードしました。 また、100V・200V兼用なタイプなので、出張工事でも電源確保が簡単です。 この一台で半自動溶接(ノンガス・ガス・ミクスガス兼用)/ 手棒溶接 / TIG溶接と様々な溶接が可能です。 MMA手棒溶接 Hot Start 溶接スタート時に瞬間的に電流値を上げ、アークスタートがスムーズに行えま す。   Arc Force 溶接棒が溶けていく中で、対象物との距離が離れても一定まで溶接が継続します。   Anti Stick 溶接スタート時に溶接棒がくっ付きにくく良い溶け込みが得られます。   MAG半自動溶接 Wire Speed  溶接する時にワイヤー速度を制御。電流が大きくなるとワイヤー速度が速くなる。   Mix Gas  ミクスガス溶接に対応でき、ビード外観が美しくて、スパッタの発生が極めて少ないです。(MIG半自動溶接のみ)   Burn Back 溶接後のワイヤ先端の大きさを制御。再アークスタート性が向上。   Spot...
    HITBOX AT2000 Mini Portable Inverter Welder

    HITBOX AT2000 Mini Portable Inverter Welder

    HITBOX AT2000 Mini Portable Inverter Welder Review Typically, Hitbox welders are available in the market with a wide range of styles. These welding equipment are inexpensive, allowing them to appeal to a wide...
    You have successfully subscribed!
    This email has been registered