HITBOX ARC160D Synergic Stick/Lift Tig Welder
-
Estimated Delivery:Apr 26 - Apr 30
-
Free Shipping & Returns
HITBOX ARC160D Synergic Stick/Lift Tig Welder
New generation arc welder
- It can be used for both 100V & 200V, and it can be used with either input.
- With a large current of 160A, it can handle alkaline welding rods! !!
- Extending the weld cable to 50 meters does not attenuate the current.
- Compatible with φ4.0 welding rods. The main body is lightweight and compact, easy to carry, and easy to go out.
2 in 1 LIFT TIG/ARC Welder
Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes.With lift tig capability, our ARC160D can weld these materials as well as stainless steel.
Hot start function
The no-load voltage of the product reaches 78V, and the current value is increased momentarily at the start of welding, allowing smooth arc start.
Anti-sticking function
At the start of welding, the welding rod does not stick easily and good penetration can be obtained.
Press this button once to adjust the welding current through the current adjustment dial. (adjustment range: 0-160a)
Press this button twice to adjust the arc force current with current adjustment dial. (adjustment range: 0-60a)
Press this button 3 times to adjusts the hot start current with current adjustment dial. (adjustment range: 0-60a)
Use a plate thickness that is approximately twice the diameter of the welding rod as a guide.
Example: When using a 2.0Φ welding rod for iron, the weldable plate thickness is 2.0mm to 4.0mm.
It may change slightly depending on the power supply status, posture, and material.
|
|
|
|
|
|---|---|---|---|
Output adjustment can be done easilyOutput adjustment is as simple as turning the output current adjustment dial, and does not impose a burden on the work. |
With overuse prevention functionIf the usage rate is exceeded, the power will be forcibly turned off to protect the transformer, eliminating the risk of burning. |
High output and energy savingThe rated usage rate of the product is 85%. In 10 minutes, the equipment can work continuously for 8 minutes. Increase control efficiency. |
Widely UsedAt the start of welding, the welding rod does not stick easily and good penetration can be obtained.Also it can weld alkaline welding rods! |
New generation arc welder
- It can be used for both 100V & 200V, and it can be used with either input.
- With a large current of 160A, it can handle alkaline welding rods! !!
- Extending the weld cable to 50 meters does not attenuate the current.
- Compatible with φ4.0 welding rods. The main body is lightweight and compact, easy to carry, and easy to go out.
2 in 1 LIFT TIG/ARC Welder
Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes.With lift tig capability, our ARC160D can weld these materials as well as stainless steel.
Hot start function
The no-load voltage of the product reaches 78V, and the current value is increased momentarily at the start of welding, allowing smooth arc start.
Anti-sticking function
At the start of welding, the welding rod does not stick easily and good penetration can be obtained.
Press this button once to adjust the welding current through the current adjustment dial. (adjustment range: 0-160a)
Press this button twice to adjust the arc force current with current adjustment dial. (adjustment range: 0-60a)
Press this button 3 times to adjusts the hot start current with current adjustment dial. (adjustment range: 0-60a)
Use a plate thickness that is approximately twice the diameter of the welding rod as a guide.
Example: When using a 2.0Φ welding rod for iron, the weldable plate thickness is 2.0mm to 4.0mm.
It may change slightly depending on the power supply status, posture, and material.
Output adjustment can be done easily
Output adjustment is as simple as turning the output current adjustment dial, and does not impose a burden on the work.
With overuse prevention function
If the usage rate is exceeded, the power will be forcibly turned off to protect the transformer, eliminating the risk of burning.
High output and energy saving
The rated usage rate of the product is 85%. In 10 minutes, the equipment can work continuously for 8 minutes. Increase control efficiency.
Widely Used
At the start of welding, the welding rod does not stick easily and good penetration can be obtained.Also it can weld alkaline welding rods!
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
Hitbox Official Quality
